diff --git a/1001011010010110100101101001011010010110100101101001011010010100 b/1001011010010110100101101001011010010110100101101001011010010100
new file mode 100644
index 0000000..43a10f1
--- /dev/null
+++ b/1001011010010110100101101001011010010110100101101001011010010100
@@ -0,0 +1,762 @@
+"1001011010010110100101101001011010010110100101101001011010010100"
+// Hardware Register Addresses (Memory-mapped I/O)
+#define HAL_BASE_ADDRESS        0xC0000000
+#define ROM_CTRL_REG            (HAL_BASE_ADDRESS + 0x0000)
+#define ROM_DATA_REG            (HAL_BASE_ADDRESS + 0x0004)
+#define ROM_ADDR_REG            (HAL_BASE_ADDRESS + 0x0008)
+#define ROM_STATUS_REG          (HAL_BASE_ADDRESS + 0x000C)
+
+#define DUAL_PTR_CTRL_REG       (HAL_BASE_ADDRESS + 0x0100)
+#define DUAL_PTR_ALPHA_REG      (HAL_BASE_ADDRESS + 0x0104)
+#define DUAL_PTR_OMEGA_REG      (HAL_BASE_ADDRESS + 0x0108)
+#define DUAL_PTR_SIZE_REG       (HAL_BASE_ADDRESS + 0x010C)
+#define DUAL_PTR_CYCLE_REG      (HAL_BASE_ADDRESS + 0x0110)
+
+#define NESW_CTRL_REG           (HAL_BASE_ADDRESS + 0x0200)
+#define NESW_INPUT_REG          (HAL_BASE_ADDRESS + 0x0204)
+#define NESW_OUTPUT_REG         (HAL_BASE_ADDRESS + 0x0208)
+#define NESW_STATE_REG          (HAL_BASE_ADDRESS + 0x020C)
+#define NESW_LUT_BASE           (HAL_BASE_ADDRESS + 0x0300)
+
+#define SYNC_CTRL_REG           (HAL_BASE_ADDRESS + 0x0400)
+#define SYNC_STATUS_REG         (HAL_BASE_ADDRESS + 0x0404)
+#define SYNC_ALPHA_REG          (HAL_BASE_ADDRESS + 0x0408)
+#define SYNC_OMEGA_REG          (HAL_BASE_ADDRESS + 0x040C)
+#define SYNC_COUNT_REG          (HAL_BASE_ADDRESS + 0x0410)
+
+#define CACHE_CTRL_REG          (HAL_BASE_ADDRESS + 0x0500)
+#define CACHE_STATUS_REG        (HAL_BASE_ADDRESS + 0x0504)
+#define CACHE_ALPHA_BASE        (HAL_BASE_ADDRESS + 0x0600)
+#define CACHE_OMEGA_BASE        (HAL_BASE_ADDRESS + 0x0700)
+
+#define IRQ_CTRL_REG            (HAL_BASE_ADDRESS + 0x0800)
+#define IRQ_STATUS_REG          (HAL_BASE_ADDRESS + 0x0804)
+#define IRQ_MASK_REG            (HAL_BASE_ADDRESS + 0x0808)
+
+// Hardware Control Bits
+#define ROM_CTRL_ENABLE         0x01
+#define ROM_CTRL_RESET          0x02
+#define ROM_CTRL_CHECKSUM       0x04
+#define ROM_STATUS_READY        0x01
+#define ROM_STATUS_ERROR        0x02
+
+#define DUAL_PTR_ENABLE         0x01
+#define DUAL_PTR_RESET          0x02
+#define DUAL_PTR_CLOCK_EN       0x04
+#define DUAL_PTR_AUTO_ADVANCE   0x08
+
+#define NESW_ENABLE             0x01
+#define NESW_RESET              0x02
+#define NESW_AUTO_MODE          0x04
+
+#define SYNC_ENABLE             0x01
+#define SYNC_RESET              0x02
+#define SYNC_IRQ_ENABLE         0x04
+#define SYNC_STATUS_DETECTED    0x01
+
+#define CACHE_ENABLE            0x01
+#define CACHE_RESET             0x02
+#define CACHE_STORM_ACTIVE      0x04
+
+#define IRQ_SYNC_PULSE          0x01
+#define IRQ_CACHE_FULL          0x02
+#define IRQ_ROM_ERROR           0x04
+#define IRQ_SYSTEM_ERROR        0x08
+
+// Hardware Status Structure
+class CHardwareStatus
+{
+  Bool rom_available;
+  Bool dual_ptr_available;
+  Bool nesw_available;
+  Bool sync_available;
+  Bool cache_available;
+  Bool irq_available;
+  U32 hardware_version;
+  U32 firmware_version;
+};
+
+// Hardware Performance Counters
+class CPerformanceCounters
+{
+  U64 rom_reads;
+  U64 dual_ptr_cycles;
+  U64 nesw_transforms;
+  U64 sync_detections;
+  U64 cache_storms;
+  U64 interrupts_handled;
+  U64 hardware_errors;
+};
+
+// Global Hardware State
+CHardwareStatus g_hw_status;
+CPerformanceCounters g_perf_counters;
+Bool g_hardware_initialized = FALSE;
+Bool g_simulation_mode = FALSE;
+
+// Low-level hardware register access functions
+U32 HAL_ReadReg(U32 address)
+{
+  if (g_simulation_mode)
+  {
+    // Simulate hardware register reads
+    switch (address)
+    {
+      case ROM_STATUS_REG:
+        return ROM_STATUS_READY;
+      case DUAL_PTR_ALPHA_REG:
+        return g_dual_pointer.pointer_alpha;
+      case DUAL_PTR_OMEGA_REG:
+        return g_dual_pointer.pointer_omega;
+      case SYNC_STATUS_REG:
+        return g_sync_detector.sync_pulse_active ? SYNC_STATUS_DETECTED : 0;
+      default:
+        return 0;
+    }
+  }
+  else
+  {
+    // Direct hardware register access
+    return *(U32*)address;
+  }
+}
+
+U0 HAL_WriteReg(U32 address, U32 value)
+{
+  if (g_simulation_mode)
+  {
+    // Simulate hardware register writes
+    switch (address)
+    {
+      case DUAL_PTR_ALPHA_REG:
+        g_dual_pointer.pointer_alpha = value & 0xFFFF;
+        break;
+      case DUAL_PTR_OMEGA_REG:
+        g_dual_pointer.pointer_omega = value & 0xFFFF;
+        break;
+      case NESW_INPUT_REG:
+        // Simulate NESW transformation
+        HAL_WriteReg(NESW_OUTPUT_REG, Transform_NESW(value & 0xFF, g_nesw_transform.current_state));
+        break;
+    }
+  }
+  else
+  {
+    // Direct hardware register access
+    *(U32*)address = value;
+  }
+}
+
+// Hardware Detection and Initialization
+Bool HAL_DetectHardware()
+{
+  U32 test_value, read_value;
+  
+  "Detecting CARDENTIFIERS hardware...\n";
+  
+  // Test ROM controller
+  test_value = 0x12345678;
+  HAL_WriteReg(ROM_ADDR_REG, test_value);
+  read_value = HAL_ReadReg(ROM_ADDR_REG);
+  g_hw_status.rom_available = (read_value == test_value);
+  
+  // Test dual pointer controller
+  test_value = 0xABCD;
+  HAL_WriteReg(DUAL_PTR_ALPHA_REG, test_value);
+  read_value = HAL_ReadReg(DUAL_PTR_ALPHA_REG);
+  g_hw_status.dual_ptr_available = (read_value == test_value);
+  
+  // Test NESW transformer
+  HAL_WriteReg(NESW_INPUT_REG, 0x55);
+  read_value = HAL_ReadReg(NESW_OUTPUT_REG);
+  g_hw_status.nesw_available = (read_value != 0x55); // Should be transformed
+  
+  // Test sync detector
+  read_value = HAL_ReadReg(SYNC_STATUS_REG);
+  g_hw_status.sync_available = ((read_value & 0xFF) != 0xFF); // Valid status register
+  
+  // Test cache controller
+  HAL_WriteReg(CACHE_CTRL_REG, CACHE_RESET);
+  read_value = HAL_ReadReg(CACHE_STATUS_REG);
+  g_hw_status.cache_available = ((read_value & 0xFF) != 0xFF);
+  
+  // Test interrupt controller
+  HAL_WriteReg(IRQ_MASK_REG, 0x0F);
+  read_value = HAL_ReadReg(IRQ_MASK_REG);
+  g_hw_status.irq_available = (read_value == 0x0F);
+  
+  // Read hardware version
+  g_hw_status.hardware_version = HAL_ReadReg(HAL_BASE_ADDRESS + 0xFFC);
+  g_hw_status.firmware_version = HAL_ReadReg(HAL_BASE_ADDRESS + 0xFF8);
+  
+  "Hardware detection results:\n";
+  "  ROM Controller: %s\n", g_hw_status.rom_available ? "FOUND" : "NOT FOUND";
+  "  Dual Pointer: %s\n", g_hw_status.dual_ptr_available ? "FOUND" : "NOT FOUND";
+  "  NESW Transform: %s\n", g_hw_status.nesw_available ? "FOUND" : "NOT FOUND";
+  "  Sync Detector: %s\n", g_hw_status.sync_available ? "FOUND" : "NOT FOUND";
+  "  Cache Controller: %s\n", g_hw_status.cache_available ? "FOUND" : "NOT FOUND";
+  "  IRQ Controller: %s\n", g_hw_status.irq_available ? "FOUND" : "NOT FOUND";
+  
+  return (g_hw_status.rom_available && g_hw_status.dual_ptr_available);
+}
+
+// ROM Hardware Interface
+Bool HAL_ROM_Initialize()
+{
+  U32 status;
+  U16 i;
+  
+  if (!g_hw_status.rom_available)
+  {
+    "ROM hardware not available, using software simulation\n";
+    return TRUE; // Software fallback
+  }
+  
+  "Initializing ROM hardware...\n";
+  
+  // Reset ROM controller
+  HAL_WriteReg(ROM_CTRL_REG, ROM_CTRL_RESET);
+  Sleep(10); // Wait for reset
+  
+  // Enable ROM controller
+  HAL_WriteReg(ROM_CTRL_REG, ROM_CTRL_ENABLE);
+  
+  // Wait for ready status
+  for (i = 0; i < 1000; i++)
+  {
+    status = HAL_ReadReg(ROM_STATUS_REG);
+    if (status & ROM_STATUS_READY)
+      break;
+    Sleep(1);
+  }
+  
+  if (!(status & ROM_STATUS_READY))
+  {
+    "ROM hardware initialization failed\n";
+    return FALSE;
+  }
+  
+  // Load ROM data
+  for (i = 0; i < PALINDROME_ROM_SIZE; i++)
+  {
+    HAL_WriteReg(ROM_ADDR_REG, i);
+    HAL_WriteReg(ROM_DATA_REG, g_palindrome_rom.data[i]);
+  }
+  
+  // Verify checksum
+  HAL_WriteReg(ROM_CTRL_REG, ROM_CTRL_ENABLE | ROM_CTRL_CHECKSUM);
+  Sleep(10);
+  
+  status = HAL_ReadReg(ROM_STATUS_REG);
+  if (status & ROM_STATUS_ERROR)
+  {
+    "ROM checksum verification failed\n";
+    return FALSE;
+  }
+  
+  g_perf_counters.rom_reads = 0;
+  "ROM hardware initialized successfully\n";
+  return TRUE;
+}
+
+U8 HAL_ROM_Read(U16 address)
+{
+  if (!g_hw_status.rom_available)
+  {
+    // Software fallback
+    return g_palindrome_rom.data[address % PALINDROME_ROM_SIZE];
+  }
+  
+  HAL_WriteReg(ROM_ADDR_REG, address);
+  g_perf_counters.rom_reads++;
+  return HAL_ReadReg(ROM_DATA_REG) & 0xFF;
+}
+
+// Dual Pointer Hardware Interface
+Bool HAL_DualPointer_Initialize(U16 drive_size)
+{
+  if (!g_hw_status.dual_ptr_available)
+  {
+    "Dual pointer hardware not available, using software simulation\n";
+    return TRUE;
+  }
+  
+  "Initializing dual pointer hardware...\n";
+  
+  // Reset dual pointer controller
+  HAL_WriteReg(DUAL_PTR_CTRL_REG, DUAL_PTR_RESET);
+  Sleep(10);
+  
+  // Configure drive size
+  HAL_WriteReg(DUAL_PTR_SIZE_REG, drive_size);
+  
+  // Initialize pointers
+  HAL_WriteReg(DUAL_PTR_ALPHA_REG, 0);
+  HAL_WriteReg(DUAL_PTR_OMEGA_REG, drive_size - 1);
+  
+  // Enable controller with auto-advance
+  HAL_WriteReg(DUAL_PTR_CTRL_REG, DUAL_PTR_ENABLE | DUAL_PTR_CLOCK_EN | DUAL_PTR_AUTO_ADVANCE);
+  
+  g_perf_counters.dual_ptr_cycles = 0;
+  "Dual pointer hardware initialized\n";
+  return TRUE;
+}
+
+U0 HAL_DualPointer_GetValues(U16 *alpha, U16 *omega)
+{
+  if (!g_hw_status.dual_ptr_available)
+  {
+    // Software fallback
+    *alpha = g_dual_pointer.pointer_alpha;
+    *omega = g_dual_pointer.pointer_omega;
+    return;
+  }
+  
+  *alpha = HAL_ReadReg(DUAL_PTR_ALPHA_REG) & 0xFFFF;
+  *omega = HAL_ReadReg(DUAL_PTR_OMEGA_REG) & 0xFFFF;
+}
+
+U64 HAL_DualPointer_GetCycleCount()
+{
+  if (!g_hw_status.dual_ptr_available)
+  {
+    return g_dual_pointer.cycle_count;
+  }
+  
+  return HAL_ReadReg(DUAL_PTR_CYCLE_REG);
+}
+
+U0 HAL_DualPointer_Advance()
+{
+  if (!g_hw_status.dual_ptr_available)
+  {
+    // Software fallback
+    AdvanceDualPointers();
+    return;
+  }
+  
+  // Hardware auto-advances, just increment counter
+  g_perf_counters.dual_ptr_cycles++;
+}
+
+// NESW Transformation Hardware Interface
+Bool HAL_NESW_Initialize()
+{
+  U16 i;
+  U32 lut_addr;
+  
+  if (!g_hw_status.nesw_available)
+  {
+    "NESW hardware not available, using software simulation\n";
+    return TRUE;
+  }
+  
+  "Initializing NESW transformation hardware...\n";
+  
+  // Reset NESW controller
+  HAL_WriteReg(NESW_CTRL_REG, NESW_RESET);
+  Sleep(10);
+  
+  // Load lookup tables into hardware
+  for (i = 0; i < 256; i++)
+  {
+    lut_addr = NESW_LUT_BASE + (NESW_NORTH * 256 + i) * 4;
+    HAL_WriteReg(lut_addr, g_nesw_transform.lut_north[i]);
+    
+    lut_addr = NESW_LUT_BASE + (NESW_SOUTH * 256 + i) * 4;
+    HAL_WriteReg(lut_addr, g_nesw_transform.lut_south[i]);
+    
+    lut_addr = NESW_LUT_BASE + (NESW_EAST * 256 + i) * 4;
+    HAL_WriteReg(lut_addr, g_nesw_transform.lut_east[i]);
+    
+    lut_addr = NESW_LUT_BASE + (NESW_WEST * 256 + i) * 4;
+    HAL_WriteReg(lut_addr, g_nesw_transform.lut_west[i]);
+  }
+  
+  // Enable NESW controller
+  HAL_WriteReg(NESW_CTRL_REG, NESW_ENABLE | NESW_AUTO_MODE);
+  
+  g_perf_counters.nesw_transforms = 0;
+  "NESW transformation hardware initialized\n";
+  return TRUE;
+}
+
+U8 HAL_NESW_Transform(U8 input, U8 nesw_state)
+{
+  if (!g_hw_status.nesw_available)
+  {
+    // Software fallback
+    return Transform_NESW(input, nesw_state);
+  }
+  
+  // Set transformation state
+  HAL_WriteReg(NESW_STATE_REG, nesw_state);
+  
+  // Perform transformation
+  HAL_WriteReg(NESW_INPUT_REG, input);
+  
+  g_perf_counters.nesw_transforms++;
+  return HAL_ReadReg(NESW_OUTPUT_REG) & 0xFF;
+}
+
+// Synchronization Detection Hardware Interface
+Bool HAL_Sync_Initialize()
+{
+  if (!g_hw_status.sync_available)
+  {
+    "Sync hardware not available, using software simulation\n";
+    return TRUE;
+  }
+  
+  "Initializing synchronization detection hardware...\n";
+  
+  // Reset sync detector
+  HAL_WriteReg(SYNC_CTRL_REG, SYNC_RESET);
+  Sleep(10);
+  
+  // Enable sync detector with interrupt
+  HAL_WriteReg(SYNC_CTRL_REG, SYNC_ENABLE | SYNC_IRQ_ENABLE);
+  
+  g_perf_counters.sync_detections = 0;
+  "Synchronization detection hardware initialized\n";
+  return TRUE;
+}
+
+Bool HAL_Sync_CheckPulse(U8 *alpha, U8 *omega, U8 *transformed)
+{
+  U32 status;
+  
+  if (!g_hw_status.sync_available)
+  {
+    // Software fallback
+    return CheckSynchronization();
+  }
+  
+  status = HAL_ReadReg(SYNC_STATUS_REG);
+  
+  if (status & SYNC_STATUS_DETECTED)
+  {
+    *alpha = HAL_ReadReg(SYNC_ALPHA_REG) & 0xFF;
+    *omega = HAL_ReadReg(SYNC_OMEGA_REG) & 0xFF;
+    *transformed = HAL_NESW_Transform(*alpha, g_nesw_transform.current_state);
+    
+    g_perf_counters.sync_detections++;
+    return TRUE;
+  }
+  
+  return FALSE;
+}
+
+U64 HAL_Sync_GetCount()
+{
+  if (!g_hw_status.sync_available)
+  {
+    return g_sync_detector.sync_count;
+  }
+  
+  return HAL_ReadReg(SYNC_COUNT_REG);
+}
+
+// Cache Storm Hardware Interface
+Bool HAL_Cache_Initialize()
+{
+  if (!g_hw_status.cache_available)
+  {
+    "Cache hardware not available, using software simulation\n";
+    return TRUE;
+  }
+  
+  "Initializing cache storm hardware...\n";
+  
+  // Reset cache controller
+  HAL_WriteReg(CACHE_CTRL_REG, CACHE_RESET);
+  Sleep(10);
+  
+  // Enable cache controller
+  HAL_WriteReg(CACHE_CTRL_REG, CACHE_ENABLE);
+  
+  g_perf_counters.cache_storms = 0;
+  "Cache storm hardware initialized\n";
+  return TRUE;
+}
+
+Bool HAL_Cache_InitiateStorm(U8 seed)
+{
+  U16 i;
+  U32 alpha_addr, omega_addr;
+  
+  if (!g_hw_status.cache_available)
+  {
+    // Software fallback
+    InitiateCacheStorm(seed);
+    return TRUE;
+  }
+  
+  // Load cache buffers
+  for (i = 0; i < CACHE_STORM_BUFFER_SIZE; i++)
+  {
+    alpha_addr = CACHE_ALPHA_BASE + i * 4;
+    omega_addr = CACHE_OMEGA_BASE + i * 4;
+    
+    HAL_WriteReg(alpha_addr, g_cache_storm.cache_alpha[i]);
+    HAL_WriteReg(omega_addr, g_cache_storm.cache_omega[i]);
+  }
+  
+  // Trigger cache storm
+  HAL_WriteReg(CACHE_CTRL_REG, CACHE_ENABLE | CACHE_STORM_ACTIVE);
+  
+  g_perf_counters.cache_storms++;
+  return TRUE;
+}
+
+// Interrupt Handling
+U0 HAL_IRQ_Handler()
+{
+  U32 irq_status;
+  
+  if (!g_hw_status.irq_available)
+    return;
+    
+  irq_status = HAL_ReadReg(IRQ_STATUS_REG);
+  
+  if (irq_status & IRQ_SYNC_PULSE)
+  {
+    "Hardware sync pulse detected!\n";
+    // Handle sync pulse interrupt
+    HAL_WriteReg(IRQ_STATUS_REG, IRQ_SYNC_PULSE); // Clear interrupt
+  }
+  
+  if (irq_status & IRQ_CACHE_FULL)
+  {
+    "Cache buffer full interrupt\n";
+    HAL_WriteReg(IRQ_STATUS_REG, IRQ_CACHE_FULL);
+  }
+  
+  if (irq_status & IRQ_ROM_ERROR)
+  {
+    "ROM error interrupt\n";
+    g_perf_counters.hardware_errors++;
+    HAL_WriteReg(IRQ_STATUS_REG, IRQ_ROM_ERROR);
+  }
+  
+  if (irq_status & IRQ_SYSTEM_ERROR)
+  {
+    "System error interrupt\n";
+    g_perf_counters.hardware_errors++;
+    HAL_WriteReg(IRQ_STATUS_REG, IRQ_SYSTEM_ERROR);
+  }
+  
+  g_perf_counters.interrupts_handled++;
+}
+
+Bool HAL_IRQ_Initialize()
+{
+  if (!g_hw_status.irq_available)
+  {
+    "IRQ hardware not available\n";
+    return TRUE;
+  }
+  
+  "Initializing interrupt controller...\n";
+  
+  // Clear all pending interrupts
+  HAL_WriteReg(IRQ_STATUS_REG, 0xFFFFFFFF);
+  
+  // Enable desired interrupts
+  HAL_WriteReg(IRQ_MASK_REG, IRQ_SYNC_PULSE | IRQ_CACHE_FULL | IRQ_ROM_ERROR | IRQ_SYSTEM_ERROR);
+  
+  // Enable interrupt controller
+  HAL_WriteReg(IRQ_CTRL_REG, 0x01);
+  
+  g_perf_counters.interrupts_handled = 0;
+  g_perf_counters.hardware_errors = 0;
+  
+  "Interrupt controller initialized\n";
+  return TRUE;
+}
+
+// Main Hardware Initialization
+Bool HAL_Initialize(Bool force_simulation = FALSE)
+{
+  "Hardware Abstraction Layer Initialization\n";
+  "========================================================\n";
+  
+  // Initialize performance counters
+  g_perf_counters.rom_reads = 0;
+  g_perf_counters.dual_ptr_cycles = 0;
+  g_perf_counters.nesw_transforms = 0;
+  g_perf_counters.sync_detections = 0;
+  g_perf_counters.cache_storms = 0;
+  g_perf_counters.interrupts_handled = 0;
+  g_perf_counters.hardware_errors = 0;
+  
+  if (force_simulation)
+  {
+    "Forcing simulation mode\n";
+    g_simulation_mode = TRUE;
+    g_hw_status.rom_available = FALSE;
+    g_hw_status.dual_ptr_available = FALSE;
+    g_hw_status.nesw_available = FALSE;
+    g_hw_status.sync_available = FALSE;
+    g_hw_status.cache_available = FALSE;
+    g_hw_status.irq_available = FALSE;
+  }
+  else
+  {
+    // Detect hardware
+    if (!HAL_DetectHardware())
+    {
+      "Hardware detection failed, enabling simulation mode\n";
+      g_simulation_mode = TRUE;
+    }
+  }
+  
+  // Initialize subsystems
+  if (!HAL_ROM_Initialize())
+  {
+    "ROM initialization failed\n";
+    return FALSE;
+  }
+  
+  if (!HAL_DualPointer_Initialize(DRIVE_SIZE_DEFAULT))
+  {
+    "Dual pointer initialization failed\n";
+    return FALSE;
+  }
+  
+  if (!HAL_NESW_Initialize())
+  {
+    "NESW transformation initialization failed\n";
+    return FALSE;
+  }
+  
+  if (!HAL_Sync_Initialize())
+  {
+    "Synchronization detection initialization failed\n";
+    return FALSE;
+  }
+  
+  if (!HAL_Cache_Initialize())
+  {
+    "Cache storm initialization failed\n";
+    return FALSE;
+  }
+  
+  if (!HAL_IRQ_Initialize())
+  {
+    "Interrupt controller initialization failed\n";
+    return FALSE;
+  }
+  
+  g_hardware_initialized = TRUE;
+  
+  "Hardware abstraction layer initialized successfully\n";
+  "Mode: %s\n", g_simulation_mode ? "SIMULATION" : "HARDWARE";
+  
+  return TRUE;
+}
+
+// Hardware Status and Diagnostics
+U0 HAL_DisplayStatus()
+{
+  "Hardware Status\n";
+  "=============================\n";
+  "Mode: %s\n", g_simulation_mode ? "SIMULATION" : "HARDWARE";
+  "Initialized: %s\n", g_hardware_initialized ? "YES" : "NO";
+  "\nHardware Components:\n";
+  "  ROM Controller: %s\n", g_hw_status.rom_available ? "AVAILABLE" : "NOT AVAILABLE";
+  "  Dual Pointer: %s\n", g_hw_status.dual_ptr_available ? "AVAILABLE" : "NOT AVAILABLE";
+  "  NESW Transform: %s\n", g_hw_status.nesw_available ? "AVAILABLE" : "NOT AVAILABLE";
+  "  Sync Detector: %s\n", g_hw_status.sync_available ? "AVAILABLE" : "NOT AVAILABLE";
+  "  Cache Controller: %s\n", g_hw_status.cache_available ? "AVAILABLE" : "NOT AVAILABLE";
+  "  IRQ Controller: %s\n", g_hw_status.irq_available ? "AVAILABLE" : "NOT AVAILABLE";
+  "\nPerformance Counters:\n";
+  "  ROM Reads: %d\n", g_perf_counters.rom_reads;
+  "  Dual Pointer Cycles: %d\n", g_perf_counters.dual_ptr_cycles;
+  "  NESW Transforms: %d\n", g_perf_counters.nesw_transforms;
+  "  Sync Detections: %d\n", g_perf_counters.sync_detections;
+  "  Cache Storms: %d\n", g_perf_counters.cache_storms;
+  "  Interrupts Handled: %d\n", g_perf_counters.interrupts_handled;
+  "  Hardware Errors: %d\n", g_perf_counters.hardware_errors;
+  "\n";
+}
+
+// Hardware-accelerated processing cycle
+U0 HAL_ProcessCycle()
+{
+  U16 alpha, omega;
+  U8 stream_alpha, stream_omega, transformed_alpha;
+  Bool sync_detected;
+  
+  // Get current pointer values
+  HAL_DualPointer_GetValues(&alpha, &omega);
+  
+  // Read data streams from ROM
+  stream_alpha = HAL_ROM_Read(alpha * STATE_SIZE);
+  stream_omega = HAL_ROM_Read(omega * STATE_SIZE);
+  
+  // Check for synchronization using hardware
+  sync_detected = HAL_Sync_CheckPulse(&stream_alpha, &stream_omega, &transformed_alpha);
+  
+  if (sync_detected)
+  {
+    "Hardware sync pulse detected! Alpha=0x%02X, Omega=0x%02X\n", stream_alpha, stream_omega;
+    
+    // Initiate hardware cache storm
+    HAL_Cache_InitiateStorm(stream_alpha);
+    
+    // Process imagination (software for now)
+    ProcessImagination();
+    CatalogueImagination();
+  }
+  
+  // Advance pointers
+  HAL_DualPointer_Advance();
+}
+
+// Test hardware functionality
+U0 HAL_TestHardware()
+{
+  U16 i;
+  U8 test_input, test_output;
+  
+  "Testing hardware functionality...\n";
+  
+  // Test NESW transformations
+  "Testing NESW transformations:\n";
+  for (i = 0; i < 4; i++)
+  {
+    test_input = 0x55;
+    test_output = HAL_NESW_Transform(test_input, i);
+    "  State %d: 0x%02X -> 0x%02X\n", i, test_input, test_output;
+  }
+  
+  // Test ROM reads
+  "Testing ROM reads:\n";
+  for (i = 0; i < 8; i++)
+  {
+    test_output = HAL_ROM_Read(i);
+    "  Address %d: 0x%02X\n", i, test_output;
+  }
+  
+  // Test dual pointers
+  "Testing dual pointers:\n";
+  for (i = 0; i < 5; i++)
+  {
+    U16 alpha, omega;
+    HAL_DualPointer_GetValues(&alpha, &omega);
+    "  Cycle %d: Alpha=%d, Omega=%d\n", i, alpha, omega;
+    HAL_DualPointer_Advance();
+  }
+  
+  HAL_DisplayStatus();
+}
+
+// Initialize HAL in simulation mode by default
+HAL_Initialize(TRUE);
+
+"Hardware Abstraction Layer Loaded Successfully\n";
+"Type 'HAL_TestHardware();' to test hardware functionality\n";
+"Type 'HAL_DisplayStatus();' to view hardware status\n";
+"Type 'HAL_ProcessCycle();' to run hardware-accelerated cycle\n";
+"0110100101101001011010010110100101101001011010010110100101101011"